|
TECHNICAL SPECIFICATION |
| Project: |
|
| Material: | Timber - Laminar bonded three times - No Warping. Standard in pine and meranti, other types of wood available upon request. |
| Profiles: | Narrow projection widths, 65mm construction depth. |
| Glazing: | Double or single glazing available to architects specification up to 24mm. |
| Expansion: | Up to 10mm expansion compensation possible, therefore, remaining equally impenetrable to the elements under hot and cold conditions. |
| Running Gear: | Twin tandem mounted double pair rollers with adjustable height reinforced running gear for low noise and long life heat resistant up to 120°c. Flush fitting recessed bottom guide track. |
| Locking: | 2 or 3 point integral lever with 24mm stroke, pressure checked up to 1000 Pascals. Lever rods have plastic end caps to stop wear and tear and noise. Profile cylinder locks available inside and out upon request. |
| Features: | Available with a separate or attached tilt and turn panel (turning 180°). Each panel can be locked in a partially open position. All systems can be supplied as standard with proprietary handles and profile cylinder lock. |
| Tests: | Officially tested to stress group 'B' to DIN 18055 by the Window Institute Rosenheim to Euro standards. Officially tested and certified according to US standard security and weather testing. |
| Note: | To achieve stress
group 'B' the panels are required to withstand 5 litres water spray per
minute per square metre of panel with wind pressure increasing from 50Pa
to 300Pa at 50Pa increments. The panels are then opened and closed 10,000
times each way, then the wind and rain test is repeated. If a single drop of water penetrates or air leakage exceeds 1m3/hour the screen will fail. |
| Finish: | Sealed for on site
painting / decorating Factory painted to RAL specification Factory stained and laquered Factory stained to match sample supplied by others |
| Description: | |
| Exterior dimension
of frame _________mm x _________mm Single wing / Bi-parting Finish __________________ Glazing _________________ |
|
| Supplier: |
Brockhouse Modernfold Ltd Kay One, 23 The Tything, Worcester, WR1 1HD |
| Tel: | 01905 330055 |
| Fax: | 01905 330234 |
| E-mail: | sales@brockhouse.net |